Top Tips - Must Read
Future Fence's Top Tips - If You Read Nothing Else - Read This
Tip #1: Use Masking Tape Around Areas Being Cut or Drilled
Applying masking tape generously gives you an easy-to-see marking surface and prevents the powdercoat from being scratched by metal shavings.
Tip #2: Do Not Use Rapid Set Concrete
Rapid Set contains an additive that may react with aluminium. Instead, use general post mix.
Tip #3: Panels and Posts are Best Cut With a Circular Saw
Most circular saws will cut through the rail or posts in one, even cut. Use a square or securely positioned straightedge as a cutting guide.
Tip #4: Avoid Wiping Aluminium Shavings Off the Panels
Wiping shavings across powdercoating can scratch the finish. Always vacuum or blow away aluminium swarf and ensure you use suitable eye protection.
Tip #5: Hinge Gates Off The More Solid Substrate
A solid substrate like masonry or a house frame is always going to give a more reliable fixing point for your hinge post. This will ensure optimal ongoing operation of the gate over time as the post is unlikely to move.
Tip #6: Carefully Plan Your Pedestrian Gate Setouts
For gates to open and close properly, you must leave the correct clearances for hinges and latch gaps. Refer to our Pedestrian Gate Setout article for suggested hinge and latch gaps based on chosen hinges and latch hardware. If no gaps are specified for your hardware, check the manufacturers instruction manual.
Tip #7: Latch Directions Can be Reversed On Mortice Locks
The latch direction on Mortice Lock Kits & Forge Handles can be reversed for left and right handed gates. The method of reversing the latch changes by handle style but usually involves lifting a tab or loosening a screw to depress and rotate the tongue.
Tip #8: Hinge Side Determines Which Way Your Gate Opens
For outward opening gates place the hinges on the outside (front) of the gate. For inward opening gates, place the hinges on inside (rear) of the gate. Ensure you have sufficient clearance for the gate to travel to its open position without obstruction.
