Section 1 - Getting Started

Edited

The following instructions are for typical residential fence installation. Requirements may vary depending on site conditions and site specific engineering requirements.


1.1 Before you start

  • Confirm the fence line, finished height, ground levels, boundary location and any required approvals.

  • Locate underground services and concealed plumbing/electrical services before digging or drilling.

  • Check that existing concrete, masonry and timber are sound and capable of supporting the installation.


1.2 Recommended tools

Depending on your installation, you may require:

  • Tape measure

  • Masking tape

  • String line

  • Spirit level and stakes

  • Square

  • Pencil

  • Drill/Driver

  • Appropriate hex-head nut drivers (5/16" and 3/8")

  • Masonry drill or SDS drill

  • Masonry & timber drill bits

  • Circular saw and/or grinder with suitable aluminium cutting blade

  • Clamps/packers

  • Spanners or sockets

  • Vacuum cleaner

  • Metal file

  • Marking spray

  • Post hole digger

  • For chemical anchors, you will need a caulking gun

  • Appropriate PPE including safety glasses and hearing protection.


Preparing your work area

A stable bench or workhorse can be useful to support posts, panels and gates while working on them. Ensure you place a protective layer like cardboard or towels over the workbench to avoid scratching the finish. Support and secure both the workpiece and off-cut so neither can move or fall when cutting.


Need a Little Extra Help?

We've designed these guides to answer the most common installation questions. If you run into an issue, please review the relevant section and any instructions supplied with your hardware.

If you're still unsure or encounter something not covered in the guides, please email Future Fence with a brief description, photos/videos of the issue so our team can assist.